ID-01-01 LED TE
Impulse LED-TE is an LED friendly version of our popular retrofit Impulse Dimmer Module. Impulse Dimmers can be operated by any momentary or centre retractive type switch.
• 250W in-line LED Dimmer (1000W for tungsten loads).
• Set both minimum and maximum light levels.
• Suitable for Trailing Edge dimmable LED loads.
• Mosfet dimming control.
• Low voltage switch plate wiring.
• Controlled by any momentary switch.
• ON/OFF, DIM UP/DIM DOWN functions.
• Multi position dimming control.
• Multi gang switch plate capabilities.
• Fully isolated switch plate input.
• Fully protected fused output.
• Complies with EC EMC and Low Voltage Directives (CE).
• 2 year warranty
A single switch can be used to provide ON/OFF/RAISE/LOWER operation.
A centre retractive switch can be used for ON/RAISE and OFF/LOWER control.
The Impulse LED-TE can also be used for multi position, multi gang dimming control and can be
programmed to set minimum and maximum light levels which provides the ability to fine tune the
dimming range to suit the wide variety of LED lamps available.
The ID-01-01-LED-TE is suitable for the control of Mains Trailing Edge Dimmable lighting loads.
Impulse modules are also available for Leading Edge Mains Dimming (ID-01-01-LED) and 0/1-10v
dimmable loads (ID-00-01). Please see separate datasheets for more information.